Important Basic Tools For Building Your Log Cabin
Like building a house is the first major project that you tried, you’ve probably asked what tools you should have. In the following paragraphs, I will most of which are useful are described. Not all are essential.
You probably already have the basics. These are: hammer, screwdriver, saw (cross section, also ripsaw if possible), the clip plane, and a small chisel, pliers, file, try square, 6-meter line, level, spatula. If you do not have all these tools, I suggest you get it.
These jobs you have done at home, you probably fairly familiar with the essential tools. But in case you forgot, here is a brief overview of how to use them.
The hammer is used to drive nails, to remove them, and as a lever. When you use the hammer nails, you must first press the nail, direction, and then drive the nail. Keep near the end of the handle so that the maximum force you to make the swing-hammer. When deleting the work of nails, a piece of wood under the head, so that the wood finish is not affected.
Key in several sizes and shapes. If several types in your toolbox.
Saws used to cut materials. The most common form, looked at the screen. According to the teeth, are generally regarded as Ripsaw saw or cross cut saw. You will use this saw to rip or cut up your wood house, if you use electrical equipment.
wooden aircraft for smooth surfaces and remove excess wood that is not enough to cut with the saw. There are several types of aircraft, but the two most common are blocking the socket level and the level.
The block plane is generally used for short plays rough. The aircraft must be maintained and a constant pressure must be applied. Unless you intentionally slightly concave, let the pressure towards the end of the board – you follow through. By cutting into the grain, work from the periphery to the center. Time to distribute the front end of the wood.
The corset and different sizes of bits are used to make holes. The clip, a tool like stool is usually at the top of the left hand while the right crank. If you have a diagonal cut, make sure the clamp perpendicular to the wood. Wood borers generally nuts. There are some exceptions. The screw will pull the bit through the wood. If the material being cut is thin, use an element of support to the fragmentation of wood on their backs to avoid.
Scissors are used in the theft of pieces of wood and make mortises. They come in different widths from 8.1 to 2 cm. They can be used in your hands or with a hammer.
Rod is very versatile. They can be used to remove the nuts, bolts, nails and stay out of different materials.
The files are steel molds with many ridges or teeth. They are used for smoothing wood or metal. You will find them particularly useful for removing jagged pieces of wood. You can also use the raw sharpening your tools to do so.
Try squares are enclosed in sections of valuable timber. When you cut a piece of lumber yard, do not trust your eyes, use the right angle.
The rule is used to measure distance. The 6-foot-rule with a piece of the end of setting is very good. Doors pressed to match the size further.
Levels are used in space to test equality. often use them, do not believe your eyes.
The blades are useful in spreading the wood pulp and painting. They are useful when the trowel Windows.
Shovels used to dig. The tapered ends. Kick ends have a large place.
Are used to cover the soil so hard to break. They vary in weight.
trestles a resting place for cutting boards or panels.
